Multilayered PdSe₂/Perovskite Schottky Junction for Fast, Self‐Powered, Polarization‐Sensitive, Broadband Photodetectors, and Image Sensor Application

Citations Over TimeTop 1% of 2019 papers

Abstract

Group-10 transition metal dichalcogenides (TMDs) with distinct optical and tunable electrical properties have exhibited great potential for various optoelectronic applications. Herein, a self-powered photodetector is developed with broadband response ranging from deep ultraviolet to near-infrared by combining FA_{1- x} Cs _x PbI₃ perovskite with PdSe₂ layer, a newly discovered TMDs material. Optoelectronic characterization reveals that the as-assembled PdSe₂/perovskite Schottky junction is sensitive to light illumination ranging from 200 to 1550 nm, with the highest sensitivity centered at ≈800 nm. The device also shows a large on/off ratio of ≈104, a high responsivity (R) of 313 mA W-1, a decent specific detectivity (D*) of ≈1013 Jones, and a rapid response speed of 3.5/4 µs. These figures of merit are comparable with or much better than most of the previously reported perovskite detectors. In addition, the PdSe₂/perovskite device exhibits obvious sensitivity to polarized light, with a polarization sensitivity of 6.04. Finally, the PdSe₂/perovskite detector can readily record five "P," "O," "L," "Y," and "U" images sequentially produced by 808 nm. These results suggest that the present PdSe₂/perovskite Schottky junction photodetectors may be useful for assembly of optoelectronic system applications in near future.

Related Papers

• → Broadband Photoresponse Enhancement of a High‐Performance t‐Se Microtube Photodetector by Plasmonic Metallic Nanoparticles(2016)136 cited
• → High Responsivity and External Quantum Efficiency Photodetectors Based on Solution-Processed Ni-Doped CuO Films(2020)78 cited
• → High responsivity ultraviolet photodetector realized via a carrier-trapping process(2010)120 cited
• → Enhanced Responsivity of Photodetectors Realized via Impact Ionization(2012)26 cited
• → Ultraviolet Photodetector Based on Mg_0.67Ni_0.33O Thin Film on SrTiO₃(2020)11 cited