Photosynthetic microbial fuel cells with positive light response

Citations Over TimeTop 10% of 2009 papers

Abstract

The current study introduces an aerobic single-chamber photosynthetic microbial fuel cell (PMFC). Evaluation of PMFC performance using naturally growing fresh-water photosynthetic biofilm revealed a weak positive light response, that is, an increase in cell voltage upon illumination. When the PMFC anodes were coated with electrically conductive polymers, the rate of voltage increased and the amplitude of the light response improved significantly. The rapid immediate positive response to light was consistent with a mechanism postulating that the photosynthetic electron-transfer chain is the source of the electrons harvested on the anode surface. This mechanism is fundamentally different from the one exploited in previously designed anaerobic microbial fuel cells (MFCs), sediment MFCs, or anaerobic PMFCs, where the electrons are derived from the respiratory electron-transfer chain. The power densities produced in PMFCs were substantially lower than those that are currently reported for conventional MFC (0.95 mW/m(2) for polyaniline-coated and 1.3 mW/m(2) for polypyrrole-coated anodes). However, the PMFC did not depend on an organic substrate as an energy source and was powered only by light energy. Its operation was CO(2)-neutral and did not require buffers or exogenous electron transfer shuttles.

Related Papers

• → Effect of increasing anode surface area on the performance of a single chamber microbial fuel cell(2009)188 cited
• → Enhanced simultaneous decolorization of azo dye and electricity generation in microbial fuel cell (MFC) with redox mediator modified anode(2016)91 cited
• → Novel microbial fuel cell design to operate with different wastewaters simultaneously(2015)45 cited
• → A multi-anode paper-based microbial fuel cell for disposable biosensors(2013)5 cited
• Novel microbial fuel cell design to operate with different wastewaters simultaneously(2016)