Channel formation and visualization of melting and crystallization behaviors in direct‐contact latent heat storage systems

Citations Over Time

Abstract

Thermal storage systems are an essential component for increasing the share of renewable energies in residential heating and for the valorization of waste heat. A key challenge for the widespread application of thermal storage systems is their limited power-to-capacity ratio. One potential solution for this challenge is represented by direct-contact latent heat storage systems, in which a phase change material (PCM) is in direct contact with an immiscible heat transfer fluid (HTF). To demonstrate the applicability of the direct-contact concept for domestic hot water production, a PCM with a phase change temperature of 59°C is chosen. To enable cost-efficient implementation of the storage system, a eutectic mixture of two salt hydrates, magnesium chloride hexahydrate and magnesium nitrate hexahydrate, is chosen as the PCM. One key aspect for the direct-contact concept is that, during discharge, the HTF channels in the PCM do not become clogged during the solidification of the PCM. In this study, the formation and topology of the channels in direct-contact systems under an optimized flow condition are investigated via visual observation and X-ray computed tomography. The elucidation of the channel structure provides information on the melting and crystallization behaviors of the PCM, which are shown schematically.

Related Papers

• → Charging performance of structured packed-bed latent thermal energy storage unit with phase change material capsules(2023)26 cited
• → Phase Change Materials for Thermal Energy Storage(2021)6 cited
• → Development and characterization of eutectic phase change material for thermal energy storage system(2020)5 cited
• → Heat Storage in Phase Change Materials(2019)