Interfacial photothermal water evaporator based on nanoporous microwave‐expanded graphite and coconut waste fibers@recycled polystyrene as substrate

Citations Over Time

Abstract

Solar water evaporators (SWE) have shown growing interest due to their capacity to transform sunlight to thermal energy. In this work, SWE were prepared based on microwave-expanded graphite as light absorber deposited onto an ecological porous substrate obtained by casting a mixture of coconut fibers and recycled polystyrene. The materials were characterized by SEM, FTIR and UV/Vis-NIR spectroscopies, and thermogravimetric analyses. It was observed that the light absorber film presented high and wide light absorption in the solar electromagnetic spectrum and increased superficial area when compared to the unexpanded graphite film counterpart. Nanopores between 400 and 900 nm and microcavities in the 200 to 500 μm range were formed at the surface of the SWE after 6 seconds of microwave exposure, which are destroyed at higher exposure times. SWE of laboratory scale diameter were tested for water evaporation at different light intensities, microwave expanding time, and thicknesses to determine their effects on evaporation rate and efficiency. It was observed that SWE rates increased from 1.09 ± 0.006 to 1.73 ± 0.007 kg h−1 m−2 for unexpanded and expanded graphite through 6 seconds, respectively; being the latter the best SWE reaching 91.5% of efficiency at 1200 W m−2 of illumination. This efficiency was stable after reaching the maximum stable efficiency in only 15 minutes. The scaling-up of the process was studied in a SWE of 6.1 cm in diameter using a bigger glass cell in the presence of pure water or simulated seawater (3.5% NaCl), achieving efficiencies of 89.8% and 86.1%, respectively.

Related Papers

• → The thermogravimetric analysis of some polysiloxanes(1998)186 cited
• → The use of thermogravimetric analysis technique for the characterization of construction materials(2008)77 cited
• → Kinetic analysis of thermogravimetric data on some nickel(II) N-alkyldithiocarbamates(1989)25 cited
• → Thermogravimetric analysis for the characterization and comparative analysis of polyvinyl chloride (PVC) wall panel(2023)1 cited
• Thermogravimetric analysis of fuel film evaporation(2006)