Micro morphological observation and mechanism analysis of boundary layer evolution in mixed powder lubrication

Citations Over Time

Abstract

Abstract In mixed‐powder‐lubricated interfaces, the lubrication performance is strongly affected by evolution of the boundary layer features. Therefore, the current investigation uses a laser microscopy system to observe the behaviours of boundary layer formed on the brass specimens during the process of graphite‐lubricated 0.45 C steel (HRC56) sliding upon brass alloy (HV160). The evolution process of mixed powder lubrication can be divided into 4 typical stages: running‐in, stable, deterioration, and damage. Multiple micro phenomena are observed in the boundary layers at different stages. These include extent of layer coverage, flaking, local adhesion, lamellar shedding, blisters, pits, and abrasion damage. These phenomena indicate that the boundary layer deteriorates from full coverage to a damaged powdery film, and eventually the serious wear on metal substrate. Moreover, an interface model of mixed powder lubrication is established to explain the changes in boundary layers. The model displays that the typically micro events above are related to the quantitative degree of overlapping of the asperities between opposing surfaces. At first, many particles bear the load collectively and adapt to velocity differences through inner shearing in powder layer. Later, plastic deformation and abrasion between asperities play a major role in surface velocity accommodation, and the metal substrates bear the load more directly.

Related Papers

• → Hydrogen-induced blistering mechanisms in thin film coatings(2011)43 cited
• → Degradation of ZrN films at high temperature under controlled atmosphere(2004)31 cited
• → Properties of Blisters Formed on Polymer Films and Differentiating them from Nanobubbles/Nanodrops(2019)14 cited
• → Friction blisters as a manifestation of pathomimia(1975)20 cited
• → STUDY ON BLISTER OF AL-SHEETS(1954)