Rheological, tensile, and thermal properties of poly(butylene succinate) composites filled with two types of cellulose (kenaf cellulose fiber and commercial cellulose)

Citations Over TimeTop 13% of 2020 papers

Abstract

Abstract Kenaf cellulose fiber was extracted from kenaf locally grown in Thailand as a potential local renewable resource for the cellulose fiber. In this study, the biodegradable polymer composites, poly(butylene succinate) (PBS)/cellulose fiber composites with different types of cellulose were prepared. The kenaf fiber treated with hydrochloric acid (KTH), extracted cellulose fiber (EC), and commercial cellulose fiber (CC) were selected as alternative renewable fillers in the PBS (the biodegradable polymer). Regarding the fiber characteristics, the aspect ratio of the EC (11.5) was found to be higher than that of the CC (6.1). In a similar manner, the EC contained 65.9% crystallinity, which was higher than that of the CC (37.0%) and the KTH (58.9%). Moreover, the EC exhibited higher thermal stability (T d[Max] = 362.9°C) than the CC (T d[Max] = 302.0°C) and the KTH (T d[Max] = 353.8°C). For PBS/cellulose fiber composites, the rheological, tensile, and thermal properties were studied. The rheology results revealed that the addition of the fiber changed the PBS microstructure. The EC fiber dispersion in the PBS seemed to be better than the others; however, the KTH fiber dispersion was poor. The addition of the fiber raised the elastic moduli of the composites by 5‐26%; however, it reduced the tensile strengths (by 14‐53%) and the decomposition temperatures (by 1‐2%). Furthermore, the addition of the fiber slightly affected the crystallization temperatures and melting temperatures of the composites. The yellowness and whiteness of the composites were marginally reduced. The composite with the EC fiber showed a significant improvement in the elastic modulus as compared to the composite with the CC fiber, while the tensile strength and the strain at maximum stress were comparable. Thus, according to the rheological, thermal, and tensile properties of the composites, the EC fiber showed a possibility of using as an alternative reinforcement material from a local renewable resource.

Related Papers

• → The Effect of Kenaf Loading on Water Absorption and Impact Properties of Polylactic Acid/ Natural Rubber/ Kenaf Core Powder Biocomposite(2019)17 cited
• Thermal properties of injection moulded polylactic acid 13 kenaf fibre biocomposite(2011)
• → Kenaf Performance in PP/EVA/Clay Biocomposite(2011)3 cited
• → Processing torque, tensile properties and morphological study of PLA/NR/kenaf biocomposite(2019)1 cited
• → The effect of type of rubber and kenaf loading on water absorption, impact properties and morphology of polylactic acid/rubber/kenaf biocomposite(2020)1 cited