Agglomeration Characteristics of Aluminum Particles in AP/AN Composite Propellants

Citations Over TimeTop 10% of 2013 papers

Abstract

Abstract Most solid rockets are powered by ammonium perchlorate (AP) composite propellant including aluminum particles. As aluminized composite propellant burns, aluminum particles agglomerate as large as above 100 μm diameter on the burning surface, which in turn affects propellant combustion characteristics. The development of composite propellants has a long history. Many studies of aluminum particle combustion have been conducted. Optical observations indicate that aluminum particles form agglomerates on the burning surface of aluminized composite propellant. They ignite on leaving the burning surface. Because the temperature gradient in the reaction zone near a burning surface influences the burning rate of a composite propellant, details of aluminum particle agglomeration, agglomerate ignition, and their effects on the temperature gradient must be investigated. In our previous studies, we measured the aluminum particle agglomerate diameter by optical observation and collecting particles. We observed particles on the burning surface, the reaction zone, and the luminous flame zone of an ammonium perchlorate (AP)/ammonium nitrate (AN) composite propellant. We confirmed that agglomeration occurred in the reaction zone and that the agglomerate diameter decreased with increasing the burning rate. In this study, observing aluminum particles in the reaction zone near the burning surface, we investigated the relation between the agglomerates and the burning rate. A decreased burning rate and increased added amount of aluminum particles caused a larger agglomerate diameter. Defining the extent of the distributed aluminum particles before they agglomerate as an agglomerate range, we found that the agglomerate range was constant irrespective of the added amount of aluminum particles. Furthermore, the agglomerate diameter was ascertained from the density of the added amount of aluminum particles in the agglomerate range. We concluded from the heat balance around the burning surface that the product of the agglomerate range and the burning rate was nearly constant irrespective of the added amount of aluminum particles. Moreover, the reduced burning rate increased the agglomerate range.

Related Papers

• → A Review on Decomposition Deflagration of Oxidizer and Binders in Composite Solid Propellants(2014)7 cited
• → Influences of Particle Properties of Oxidizers on Burning Rate Characteristics of Composite Propellants(2017)2 cited
• → Combustion of Composite Propellants(2015)6 cited
• → Heat Release in Gas Phase Near Burning Surface of Composite Propellants -Ammonium perchlorate (AP) and Black powder (BP) propellant-(2009)2 cited
• → Base Bleed Solid Propellant- Properties and Processibility for Industrial Solid Propellant(1988)1 cited