Separation of Plutonium and Neptunium Species by Capillary Electrophoresis−Inductively Coupled Plasma-Mass Spectrometry and Application to Natural Groundwater Samples

Citations Over TimeTop 10% of 2003 papers

Abstract

Capillary electrophoresis (CE) was coupled to ICPMS in order to combine the good performance of this separation technique with the high sensitivity of the ICPMS for the analysis of plutonium and neptunium oxidation states. The combination of a fused-silica capillary with a MicroMist AR 30-I-FM02 nebulizer and a Cinnabar small-volume cyclonic spray chamber yielded the best separation results. With this setup, it was possible to separate a model element mixture containing neptunium (NpO2(+)), uranium (UO2(2+)), lanthanum (La3+), and thorium (Th4+) in 1 M acetic acid. The same conditions were also suitable for the separation of various oxidation states of plutonium and neptunium in different aqueous samples. All separations were obtained within less than 15 min. A detection limit of 50 ppb identical with 2 x 10(-7) M (3-fold standard deviation of a blank) was achieved. To prove the negligible disturbance of the plutonium and neptunium redox equilibria during the CE separations, plutonium and neptunium speciation by CE-ICPMS in acidic solutions was compared with the results of UV/visible absorption spectroscopy and was found to be in good agreement. The CE-ICPMS system was also applied to study the reduction of Pu(VI) in a humic acid-containing groundwater at different pH values.

Related Papers

• → Americium and neptunium borides(1969)52 cited
• → On the Formation of Americium-and Neptunium-Containing Titanates(1997)3 cited
• → Hydrogen generation in nitric acid solutions of plutonium(2005)1 cited
• → Evaluation of anion exchange resins for processing plutonium--neptunium residues(1977)1 cited
• Separation Method of Uranium and Plutonium From Large Amount of Neptunium(2013)