A Direct Injection High-Efficiency Nebulizer for Inductively Coupled Plasma Mass Spectrometry

Citations Over TimeTop 1% of 1998 papers

Abstract

A simple, relatively low-cost direct injection high-efficiency nebulizer (DIHEN) is introduced for argon inductively coupled plasma (Ar ICP) spectrometry. The DIHEN may be operated at solution uptake rates of 1-100 microL/min. Analytical performance indexes for the DIHEN and fundamental characteristics of the aerosol produced are obtained using an ICP mass spectrometer (ICPMS) and a two-dimensional phase Doppler particle analyzer (2D PDPA), respectively. Results are compared to those obtained with a conventional crossflow pneumatic nebulizer (PN), equipped with a Scott-type spray chamber. Droplet sizes and velocities produced with the DIHEN are smaller than those reported for the direct injection nebulizer (DIN). The DIHEN offers optimal sensitivity at low injector gas flow rates (approximately 0.25 L/min) and high rf power (approximately 1.5 kW). For the 17 elements tested, detection limits (ppt) and sensitivities achieved with the DIHEN (at 85 microL/min) are similar to, or better than, those obtained on the same instrument using the PN (at 1 mL/min). However, because the primary aerosol is injected directly into the plasma, oxide-to-metal ion ratios (MO+/M+) are high, as in the case of the DIN. The utility of the DIHEN for the analysis of small-volume samples is demonstrated by microscale flow injection analysis (muFIA) of Cr bound to human lung DNA. Detection of Cr at the femtogram level is feasible.

Related Papers

• → Preliminary characterization and fundamental properties of aerosols generated by a flow focusing pneumatic nebulizer(2004)26 cited
• → Study of the matrix effect of easily and non-easily ionizable elements in inductively coupled argon plasma. Part 2. Equilibrium plasma composition(1993)25 cited
• Determination of Fifty Elements in Cobalt-Rich Crusts by Inductively Coupled Plasma Optical Emission Spectrometry and Inductively Coupled Plasma Mass Spectrometry(2013)
• Numerical Simulation of Influence of Argon Flowrate on Tundish Nozzle Clogging during Continuous Casting(2014)
• THE DETERMINATION OF Al_2O_3 AND 5 ELEMENTS IN POLY ALUMINIUM CHLORIDE BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETER METHOD(1999)