Accelerating Bubble Detachment in Porous Transport Layers with Patterned Through-Pores

Citations Over TimeTop 10% of 2020 papers

Abstract

Mass transport losses ultimately suppress gas evolving electrochemical energy conversion technologies, such as fuel cells and carbon dioxide electrolyzers, from reaching the high current densities needed to realize commercial success. In this work, we reach ultrahigh current densities up to 9 A/cm2 in a polymer electrolyte membrane (PEM) water electrolyzer with the application of custom porous transport layers (PTLs) with patterned through-pores (PTPs), and we reduce the mass transport overpotentials of the electrolyzer by up to 76.7 %. This dramatic performance improvement stems from the 43.5 % reduction in gas saturation at the catalyst layer-PTL interface region. Moreover, the presence of PTPs leads to more rapid bubble coalescence and subsequently more frequent bubble snap-off (∼3.3 Hz), thereby enhancing the rate of gas removal and liquid water reactant delivery to the reaction sites. This work is highly informative for designing PTLs for optimal gas removal for a wide range of gas evolving electrochemical energy conversion technologies.

Related Papers

• → Modeling and simulation of PEM fuel cells based on electrochemical model(2011)15 cited
• → Numerical Investigation of Temperature and Current Density Distribution on (PEM) Fuel Cell Performance(2018)8 cited
• → Numerical Analysis of Mechanical Multi-Contacts on the Interfaces in a PEM Fuel Cell Stack(2009)1 cited
• → Computer simulation for dynamic characteristics of proton exchange membrane fuel cell(2016)1 cited
• → Experiments on performance of PEM fuel cell with the cathode up(2010)2 cited