Custom-Tailoring Loose Nanofiltration Membrane for Precise Biomolecule Fractionation: New Insight into Post-Treatment Mechanisms

Citations Over TimeTop 10% of 2020 papers

Abstract

Loose nanofiltration (NF) membranes with diverse selectivity can meet the great demands in various bioseparation applications. Thus, a facile strategy to tune the properties such as pore size, surface charge, and hydrophilicity of the NF membrane is required to produce tailor-made loose NF membranes without changing the existing production line. Herein, we systematically investigated the post-treatment of the nascent poly(piperazine amide) NF membranes using different reagents (organic acids, weak bases, organic solvents and ionic liquid (IL)). Various characterizations revealed that the skin/separation layer became looser and permeance was promoted with the decrease of salt rejection in varying degrees. It was found that the O/N ratio did not rigorously represent the cross-linking degree of the skin layer, because besides the hydrolysis of the residual acyl chloride impeding the amido bond formation, the breaking of existing amido bonds and the grafting of free trimesoyl chloride molecules on the nascent membranes could also increase the O/N ratio during post-treatments. Then three mechanisms including hydrolysis, swelling rearrangement and capping reaction effects were proposed to better understand the membrane properties variations. All these effects resulted in larger pore size of the NF membrane, and the hydrolysis/capping effect might increase negative charge and hydrophilicity on the membrane, while the swelling rearrangement could produce less defective skin structure. These three effects might be involved together during a single treatment. Finally, the NF membrane post-treated by N-hexane could efficiently separate antibiotics and NaCl with the highest permeate flux, whereas the one post-treated by ionic liquid outperformed others for the decoloration of cane molasses (much more efficient than NF270, DL, and NTR7450 membranes). The long-term operating stability of the post-treated membranes selected was also confirmed by a continuous crossflow filtration for 15 h with regular alkaline cleaning.

Related Papers

• → Recent developments in thin film (nano)composite membranes for solvent resistant nanofiltration(2015)210 cited
• → Ultrathin lamellar MoS2 membranes for organic solvent nanofiltration(2020)82 cited
• → Enhancing the removal of organic micropollutants by nanofiltration membrane with Fe (III)–tannic acid interlayer: Mechanisms and environmental implications(2023)67 cited
• → pH-responsive BNNS/PAA nanofiltration membrane for tunable water permeance and efficient dye separation(2023)18 cited
• → Oil-in-water nanoemulsions for better nanofiltration membranes(2023)3 cited