Printable Liquid Metal Microparticle Ink for Ultrastretchable Electronics
Citations Over TimeTop 10% of 2020 papers
Abstract
Liquid metal confined in the elastomer represents an ideal platform for stretchable electronics with ultimate deformability. To enable facile and scalable patterning of conductive features, bulk liquid metal is typically dispersed into fine particles to formulate printable inks. The presence of native oxide or organic ligands stabilizing these liquid metal particles unfortunately inhibits their direct coalescence to recover the metallic conductivity and liquid-state deformability. Here, we report a chemical sintering process that converts printed liquid metal microparticles into a highly deformable conductor. The process involves the removal of surface passivating oxide by a short exposure to acid fume and subsequent selective wetting of liquid metal microparticles onto copper nanoplates present in the ink formulation. The chemical reaction provides the basis for a facile and scalable procedure to print conductive features over a large area with exceptional conductivity (>104 S cm-1) and ultrahigh stretchability (∼1000% strain). Their practical suitability is demonstrated by the fabrication of an ultrastretchable ribbon cable and an epidermal heater.
Related Papers
- → Inkjet printing of silver conductive ink on textiles for electronic applications: impact of ink formulation on electrical performances of the ink(2023)5 cited
- PRINTING OF CONDUCTIVE INK TRACKS ON TEXTILES USING SILKSCREEN PRINTING(2015)
- → An Experimental Study of Graphene-Based Conductive Ink for Inkjet-Printable Electronics(2021)1 cited
- → Study on Pretreatment of Non-permeable Substrate Used for Printing Conductive-Ink(2019)
- → Polymeric Ink for Printed Electronics(2021)