Constructing a Rigid-and-Flexible Twin-Stage Gradient Interphase through Starlike Copolymer Coating on Carbon Fibers: A Route for Enhancing Interfacial Properties of Composites

Citations Over TimeTop 10% of 2021 papers

Abstract

A rigid-and-flexible interphase was established by a starlike copolymer (Pc-PGMA/Pc) consisting of one tetraaminophthalocyanine (TAPc) core with four TAPc-difunctionalized poly(glycidyl methacrylate) (PGMA) arms through the surface modification of carbon fibers (CFs) and compared with various interphases constructed by TAPc and TAPc-connected PGMA (Pc-PGMA). The increase in the content of N-C═O showed that PGMA/Pc branches were successfully attached onto the CF-(Pc-PGMA/Pc) surface, exhibiting concavo-convex microstructures with the highest roughness. Through adhesive force spectroscopy by atomic force microscopy (AFM) with peak force quantitative nanomechanical mapping (PF-QNM) mode and visualization of the relative distribution of TAPc/PGMA via a Raman spectrometer, a rigid interphase with highly cross-linked TAPc and a flexible layer from PGMA arms as the soft segment were separately detected in CF-TAPc/EP and CF-(Pc-PGMA)/EP composites. The rigid-and-flexible interphase in the CF-(Pc-PGMA/Pc)/EP composite provided excellent stress-transfer capability by the rigid inner modulus intermediate layer and energy absorption efficiency from the flexible outer layer, which contributed to 64.6 and 61.8% increment of transverse fiber bundle test (TFBT) strength, and 33.8 and 40.6% enhancement in interfacial shear strength (IFSS) in comparison with those of CF-TAPc/EP and CF-(Pc-PGMA)/EP composites. Accordingly, schematic models of the interphase reinforcing mechanism were proposed. The interfacial failures in CF-TAPc/EP and CF-(Pc-PGMA)/EP composites were derived from the rigid interphase without effective relaxation of interfacial stress and soft interphase with excessive fiber-matrix interface slippage, respectively. The cohesive failure in the CF-(Pc-PGMA/Pc)/EP composite was attributed to the crack deflection through the balance of the modulus and deformability from the twin-stage gradient intermediate layer.

Related Papers

• → Copolymerization of methyl methacrylate with glycidyl methacrylate and the reaction of the copolymer with amines(1966)60 cited
• → Development of novel acid–base ions exchanger for basic dye removal: phosphoric acid doped pyrazole-g-polyglycidyl methacrylate(2016)14 cited
• → Minimum Halloysite Length for Efficient Load Transfer Through the Interphase of Polymer Nanocomposites in Biomedical Applications(2022)5 cited
• STUDY ON COPOLYMERIZATION OF D_3~F, D_4(2002)
• → Interfacial diffusion in layered polyesters(1996)