In Situ Chemical Modification with Zwitterionic Copolymers of Nanofiltration Membranes: Cure for the Trade-Off between Filtration and Antifouling Performance

Citations Over TimeTop 12% of 2022 papers

Abstract

Breaking the trade-off between filtration performance and antifouling property is critical to enabling a thin-film nanocomposite (TFC) nanofiltration (NF) membrane for a wide range of feed streams. We proposed a novel design route for TFC NF membranes by grafting well-defined zwitterionic copolymers of [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (SBMA) and 2-aminoethyl methacrylate hydrochloride (AEMA) on the polyamide surfaces via an in situ surface chemical modification process. The successful grafting of a zwitterionic copolymer imparted the modified NF membranes with better surface hydrophilicity, a larger actual surface area (i.e., nodular structures), and a thinner polyamide layer. As a result, the water permeability of the modified membrane (i.e., TFC-10) was triple that of the pristine TFC membrane while maintaining high Na₂SO₄ rejection. We further demonstrated that the TFC-10 membrane possessed exceptional antifouling properties in both static adsorption tests and three cycles of dynamic protein and humic acid fouling tests. To recap, this work provides valuable insights and strategies for the fabrication of TFC NF membranes with simultaneously enhanced filtration performance and antifouling property.

Related Papers

• → Surface colonisation by marine organisms and its impact on antifouling research(2009)43 cited
• → Integrating biofouling sensing with fouling mitigation in a two-electrode electrically conductive membrane filtration system(2022)18 cited
• → A Short Review of Antifouling Paint Performance in Tropical Seawater of Indonesia(2018)4 cited
• → Marine Anti-biofouling System Using Titanium Film(2012)
• Studies on the Causes and the Prevention Technologies of the Nanofiltration Membrane Fouling(2006)