Highly Efficient and Thermally Stable K₃AlF₆:Mn4+ as a Red Phosphor for Ultra-High-Performance Warm White Light-Emitting Diodes

Citations Over TimeTop 1% of 2017 papers

Abstract

Following pioneering work, solution-processable Mn4+-activated fluoride pigments, such as A₂BF₆ (A = Na, K, Rb, Cs; A₂ = Ba, Zn; B = Si, Ge, Ti, Zr, Sn), have attracted considerable attention as highly promising red phosphors for warm white light-emitting diodes (W-LEDs). To date, these fluoride pigments have been synthesized via traditional chemical routes with HF solution. However, in addition to the possible dangers of hypertoxic HF, the uncontrolled precipitation of fluorides and the extensive processing steps produce large morphological variations, resulting in a wide variation in the LED performance of the resulting devices, which hampers their prospects for practical applications. Here, we demonstrate a prototype W-LED with K₃AlF₆:Mn4+ as the red light component via an efficient and water-processable cation-exchange green route. The prototype already shows an efficient luminous efficacy (LE) beyond 190 lm/W, along with an excellent color rendering index (Ra = 84) and a lower correlated color temperature (CCT = 3665 K). We find that the Mn4+ ions at the distorted octahedral sites in K₃AlF₆:Mn4+ can produce a high photoluminescence thermal and color stability, and higher quantum efficiency (QE) (internal QE (IQE) of 88% and external QE (EQE) of 50.6%.) that are in turn responsible for the realization of a high LE by the warm W-LEDs. Our findings indicate that the water-processed K₃AlF₆ may be a highly suitable candidate for fabricating high-performance warm W-LEDs.

Related Papers

• → Energy-Efficient, High-Color-Rendering LED Lamps Using Oxyfluoride and Fluoride Phosphors(2010)277 cited
• → A novel white light-emitting diode (w-LED) fabricated with Sr6BP5O20:Eu2+ phosphor(2006)46 cited
• → Spectral Optimization of Phosphor-Coated White LEDs for Color Rendering and Luminous Efficacy(2014)19 cited
• → The Modeling of Two Phosphors in Conversion White-Light LED(2017)6 cited