Enhancing Thermoelectric Performances of Bismuth Antimony Telluride via Synergistic Combination of Multiscale Structuring and Band Alignment by FeTe₂ Incorporation

Citations Over TimeTop 10% of 2018 papers

Abstract

It has been a difficulty to form well-distributed nano- and mesosized inclusions in a Bi₂Te₃-based matrix and thereby realizing no degradation of carrier mobility at interfaces between matrix and inclusions for high thermoelectric performances. Herein, we successfully synthesize multistructured thermoelectric Bi_0.4Sb_1.6Te₃ materials with Fe-rich nanoprecipitates and sub-micron FeTe₂ inclusions by a conventional solid-state reaction followed by melt-spinning and spark plasma sintering that could be a facile preparation method for scale-up production. This study presents a bismuth antimony telluride based thermoelectric material with a multiscale structure whose lattice thermal conductivity is drastically reduced with minimal degradation on its carrier mobility. This is possible because a carefully chosen FeTe₂ incorporated in the matrix allows its interfacial valence band with the matrix to be aligned, leading to a significantly improved p-type thermoelectric power factor. Consequently, an impressively high thermoelectric figure of merit ZT of 1.52 is achieved at 396 K for p-type Bi_0.4Sb_1.6Te₃-8 mol % FeTe₂, which is a 43% enhancement in ZT compared to the pristine Bi_0.4Sb_1.6Te₃. This work demonstrates not only the effectiveness of multiscale structuring for lowering lattice thermal conductivities, but also the importance of interfacial band alignment between matrix and inclusions for maintaining high carrier mobilities when designing high-performance thermoelectric materials.

Related Papers

• → Enhanced thermoelectric properties of bismuth telluride bulk achieved by telluride-spilling during the spark plasma sintering process(2017)82 cited
• → Preparation and Properties of Lead Telluride(1954)21 cited
• On the heat capacity of lead selenide and telluride(1994)
• → Formation of lead telluride films by vapour plating(1961)1 cited
• → THERMOELECTRIC PROPERTIES AND STRUCTURE OF Sn-IMPLANTED LEAD TELLURIDE(1999)