Synergistic Coupling of Proton Conductors BaZr_0.1Ce_0.7Y_0.1Yb_0.1O_3−δ and La₂Ce₂O₇ to Create Chemical Stable, Interface Active Electrolyte for Steam Electrolysis Cells

Citations Over TimeTop 10% of 2019 papers

Abstract

For the first time, proton conductors BaZr_0.1Ce_0.7Y_0.1Yb_0.1O_3-δ (BZCYYb) and La₂Ce₂O₇ (LCO) are combined to create an interface active and steam-tolerant electrolyte for high-performance proton-conducting solid oxide electrolysis cells. LCO shows good chemical compatibility with BZCYYb. The readily fabricated LCO/BZCYYb bilayer electrolyte can be densified at a temperature of as low as 1300 °C versus ∼1600 °C for the benchmark steam-stable BaZr_0.8Y_0.2O_3-δ electrolyte. With Pr₂NiO_4+δ as the anode and Ni as the cathode catalyst, this bilayer electrolyte cell yields a current density of 975 and 300 mA/cm2 under a 1.3 V applied potential at 700 and 600 °C, respectively. This performance is among the best of all H-SOECs equipped with a chemically stable electrolyte so far. A BZCYYb layer in the bilayer electrolyte promotes the hydrogen evolution reaction at the cathode side, resulting in a 108% improvement over the cell without this layer. The LCO layer, on the other hand, effectively protects this functional BZCYYb layer from the high concentration of steam in a practical SOEC operation condition. The cell without the LCO layer shows degradation in terms of an increased electrolyzing potential from 1.07 to 1.29 V during a constant 400 mA/cm2 operation at 700 °C. In contrast, the bilayer electrolyte cell maintains the same electrolyzing potential of 1.13 V under the same conduction for a 102 h operation. These findings demonstrate that this synergic bilayer electrolyte design is a vital strategy to overcome the dilemma between performance and stability faced by the current benchmark Zr- or Ce-rich Ba(CeZr)O_3-δ electrolysis cells to achieve excellent performance and stability at the same time.

Related Papers

• → Change of Anode Operation Pattern from Single to Double Staircase at Albras(2020)1 cited
• → Anode Effect Initiation during Aluminium Electrolysis in a Two-Compartment Laboratory Cell(2016)3 cited
• → Anode Effect Initiation During Aluminium Electrolysis in A Two Compartment Laboratory Cell(2016)3 cited
• The behavior of anode bubbles in aluminum electrolytic cell(2013)
• → Effect of Anode Dielectric Coating on Hall Thruster Operation(2003)