Methylammonium Lead Iodide Incorporated Poly(vinylidene fluoride) Nanofibers for Flexible Piezoelectric–Pyroelectric Nanogenerator
Citations Over TimeTop 10% of 2019 papers
Abstract
This work introduces a piezoelectric-pyroelectric nanogenerator (P-PNG) based on methylammonium lead iodide (CH3NH3PbI3) incorporated electrospun poly(vinylidene fluoride) (PVDF) nanofibers that are able to harvest mechanical and thermal energies. During the application of a periodic compressive contact force at a frequency of 4 Hz, an output voltage of ∼220 mV is generated. The P-PNG has a piezoelectric coefficient (d33) of ∼19.7 pC/N coupled with a high durability (60 000 cycles) and quick response time (∼1 ms). The maximum generated output power density (∼0.8 mW/m2) is sufficient to charge up a variety of capacitors, with the potential to replace an external power supply to drive portable devices. In addition, upon exposure to cyclic heating and cooling at a temperature of 38 K, a pyroelectric output current of 18.2 pA and a voltage of 41.78 mV were achieved. The fast response time of 1.14 s, reset time of 1.25 s, and pyroelectric coefficient of ∼44 pC/m2 K demonstrate a self-powered temperature sensing capability of the P-PNG. These characteristics make the P-PNG suitable for flexible piezoelectric-pyroelectric energy harvesting for self-powered electronic devices.
Related Papers
- → Wearable and Stretchable Triboelectric Nanogenerator Based on Crumpled Nanofibrous Membranes(2019)133 cited
- → Piezoelectric peptide-based nanogenerator enhanced by single-electrode triboelectric nanogenerator(2017)54 cited
- → Pyroelectric Ceramics and Thin Films: Characterization, Properties and Selection(2004)
- PbSc_(0.5)Ta_(0.5)O_3 pyroelectric materials and their application in pyroelectric detector arrays(2003)