Oxygen Evolution Electrocatalysis in Acids: Atomic Tuning of the Stability Number for Submonolayer IrOx on Conductive Oxides from Molecular Precursors
Citations Over TimeTop 21% of 2022 papers
Abstract
Proton-exchange-membrane water electrolyzers (PEMWEs) produce high-purity H2, withstand load fluctuations, and operate with a pure-water feed but require platinum-group-metal catalysts for durability, such as IrO2 and Pt, due to the acidic environment. At the anode, the slow oxygen evolution reaction (OER) requires a high overpotential to achieve relevant current densities (>2 A·cm–2) even with a high loading of IrO2. Using a simple commercial 1,5-cyclooctadiene iridium chloride dimer precursor, we synthesized submonolayer-thick IrOx on the surfaces of conductive metal oxides to make every Ir atom available for catalysis and reach the ultimate lower limit for Ir loading. We show that the reaction on Sb/SnO2 and F/SnO2 conductive oxides is surface-limited and that a continuous Ir–O–Ir network provides improved stability and activity. We cover IrOx with a thin layer of acid-stable TiOx by atomic-layer deposition. The effects of TiOx on the catalyst’s performance were assessed by inductively coupled plasma mass spectrometry (ICP-MS) coupled in situ with an electrochemical flow cell and ex situ by X-ray photoelectron spectroscopy. Tuning the binding environment of IrOx by TiOx addition enhances the intrinsic activity of the active sites, simultaneously accelerating the dissolution of the catalyst and the metal-oxide support. We illustrate the interplay between the support, catalyst, and protection-layer dissolution with OER activity, and highlight the effects of annealing to densify the TiOx protection layer on stability/activity. These ultrathin supported Ir-based catalysts do not eliminate the long-standing issue of the catalyst and support instability during OER in acids, but do provide new insight into the catalyst–support interactions and may also be of utility for advanced spectroscopic investigations of the OER mechanism.
Related Papers
- → Thermo-selenizing to rationally tune surface composition and evolve structure of stainless steel to electrocatalytically boost oxygen evolution reaction(2020)59 cited
- → Facile synthesis of interlaced flower-like layered double hydroxides grown on porous CoMoP as a highly efficient electrocatalyst for hydrogen evolution reaction(2023)33 cited
- → Oxygen Evolution Reaction (OER) on Clean and Oxygen Deficient Low-Index SrTiO3 Surfaces: A Theoretical Systematic Study(2019)20 cited
- → Cover Picture: A 3D Nanoporous Ni–Mo Electrocatalyst with Negligible Overpotential for Alkaline Hydrogen Evolution (ChemElectroChem 7/2014)(2014)4 cited
- → A 3D Nanoporous Ni–Mo Electrocatalyst with Negligible Overpotential for Alkaline Hydrogen Evolution(2014)4 cited