Mechanism of CO₂ Hydrogenation on Pd/Al₂O₃ Catalysts: Kinetics and Transient DRIFTS-MS Studies

Citations Over TimeTop 10% of 2015 papers

Abstract

The hydrogenation of CO2 was investigated over a wide range of reaction conditions, using two Pd/-Al2O3 catalysts with different Pd loadings (5% and 0.5%) and dispersions (???11% and ???100%, respectively). Turnover rates for CO and CH4 formation were both higher over 5% Pd/Al2O3 with a larger average Pd particle size than those over 0.5% Pd/Al2O3 with a smaller average particle size. The selectivity to methane (22-40%) on 5% Pd/Al2O3 was higher by a factor of 2-3 than that on 0.5% Pd/Al2O3. The drastically different rate expressions and apparent energies of activation for CO and CH4 formation led us to conclude that reverse water gas shift and CO2 methanation do not share the same rate-limiting step on Pd and that the two pathways are probably catalyzed at different surface sites. Measured reaction orders in CO2 and H2 pressures were similar over the two catalysts, suggesting that the reaction mechanism for each pathway does not change with particle size. In accordance, the DRIFTS results reveal that the prevalent surface species and their evolution patterns are comparable on the two catalysts during transient and steady-state experiments, switching feed gases among CO2, H2, and CO2 + H2. The DRIFTS and MS results also demonstrate that no direct dissociation of CO2 takes place over the two catalysts and that CO2 has to first react with surface hydroxyls on the oxide support. The thus-formed bicarbonates react with dissociatively adsorbed hydrogen on Pd particles to produce adsorbed formate species (bifunctional catalyst: CO2 activation on the oxide support and H2 dissociation on the metal particles). Formates near the Pd particles (most likely at the metal/oxide interface) can react rapidly with adsorbed H to produce CO, which then adsorbs on the metallic Pd particles. Two types of Pd sites are identified: one has a weak interaction with CO, which easily desorbs into gas phase at reaction temperatures, whereas the other interacts more strongly with CO, which is mainly in multibound forms and remains stable in He flow at high temperatures, but is reactive toward adsorbed H atoms on Pd leading eventually to CH4 formation. 5% Pd/Al2O3 contains a larger fraction of terrace sites favorable for forming these more multibound and stable CO species than 0.5% Pd/Al2O3. Consequently, we propose that the difference in the formation rate and selectivity to CH4 on different Pd particle sizes stems from the different concentrations of the reactive intermediate for the methanation pathway on the Pd surface. © 2015 American Chemical Society

Related Papers

• → Enhanced performance of Rh₁/TiO₂ catalyst without methanation in water‐gas shift reaction(2016)98 cited
• → Hydrogen production by the water-gas shift reaction using CuNi/Fe₂O₃ catalyst(2015)93 cited
• → CO₂ Conversion via Reverse Water Gas Shift Reaction Using Fully Selective Mo–P Multicomponent Catalysts(2022)68 cited
• → Hydrogen reverse spillover eliminating methanation over efficient Pt–Ni catalysts for the water–gas shift reaction(2022)7 cited
• → Methanation and water-gas shift reactions over Pt/CeO2(1985)63 cited