Palladium Diselenide Long-Wavelength Infrared Photodetector with High Sensitivity and Stability
Citations Over TimeTop 1% of 2019 papers
Abstract
A long-wavelength infrared photodetector based on two-dimensional materials working at room temperature would have wide applications in many aspects in remote sensing, thermal imaging, biomedical optics, and medical imaging. However, sub-bandgap light detection in graphene and black phosphorus has been a long-standing scientific challenge because of their low photoresponsivity, instability in the air, and high dark current. In this study, we report a highly sensitive, air-stable, and operable long-wavelength infrared photodetector at room temperature based on PdSe2 phototransistors and their heterostructure. A high photoresponsivity of ∼42.1 AW-1 (at 10.6 μm) was demonstrated, which is an order of magnitude higher than the current record of platinum diselenide. Moreover, the dark current and noise power density were suppressed effectively by fabricating a van der Waals heterostructure. This work fundamentally contributes to establishing long-wavelength infrared detection by PdSe2 at the forefront of long-IR two-dimensional-materials-based photonics.
Related Papers
- → A High‐Performance Self‐Powered Photodetector Based on Monolayer MoS2/Perovskite Heterostructures(2018)130 cited
- → Probing into Reverse Bias Dark Current in Perovskite Photodiodes: Critical Role of Surface Defects(2023)26 cited
- → Photodiodes for a 1.5–4.8 µm spectral range based on type-II GaSb/InGaAsSb heterostructures(2001)11 cited
- → Analysis of dark currents and deep level traps in InP- and GaAs-based In0.83Ga0.17As photodetectors(2017)5 cited
- Design of CMOS Process Compatible Photodetectors for Fluorescence Detecting Application(2008)