Design Considerations for Electrode Buffer Layer Materials in Polymer Solar Cells
Citations Over TimeTop 10% of 2014 papers
Abstract
Electrode buffer layers in polymer-based photovoltaic devices enable highly efficient devices. In the absence of buffer layers, we show that diode rectification is lost in ITO/P3HT:PCBM/Ag (ITO = indium tin oxide; P3HT = poly(3-hexylthiophene); PCBM = phenyl C61-butyric acid methyl ester) devices due to nonselective charge injection through the percolated phase pathways of a bulk heterojunction active layer. Charge-selective injection, and thus rectification and device function, can be regained by placing thin, polymeric buffer layers that break the direct electrode-active layer contact. Additionally, we show that strong active layer-buffer layer interactions lead to unwanted vertical phase separation and a kinked current-voltage curve. Device function is regained, increasing power conversion efficiency from 3.6% to 7.2%, by placing a noninteracting layer between the buffer and active layer. These results guide the design and selection of future polymeric electrode buffer layers for efficient polymer solar cell devices.
Related Papers
- → The effect of active layer thickness and composition on the performance of bulk-heterojunction solar cells(2006)291 cited
- → High efficiency polymer solar cells with vertically modulated nanoscale morphology(2009)131 cited
- → Achieving 15.81% and 15.29% efficiency of all-polymer solar cells based on layer-by-layer and bulk heterojunction structures(2022)94 cited
- → Sequentially Deposited Active Layer with Bulk-Heterojunction-like Morphology for Efficient Conventional and Inverted All-Polymer Solar Cells(2021)14 cited
- Efficiency Enhancement of Solar Cells by Nanoscale Morphology(2011)