Electrochemical Stability of Thin-Film LiCoO2 Cathodes by Aluminum-Oxide Coating
Citations Over TimeTop 10% of 2003 papers
Abstract
High-performance thin-film LiCoO2 cathodes were successfully fabricated by aluminum-oxide coating. Both the galvanostatic charge−discharge experiments and the cyclic voltammograms (CVs) showed enhanced electrochemical properties in the Al2O3-coated LiCoO2 films compared to those in the uncoated ones. The improved cycling behaviors in the coated samples are caused by the suppression of cobalt dissolution from the LiCoO2 thin films, with the formation of an aluminum-oxide solid electrolyte residing between the LiCoO2 cathode and liquid electrolyte. Galvanostatic intermittent titration technique (GITT) results clearly showed that the Al2O3-coated samples had higher Li diffusivities than the uncoated ones after 80 cycles. The effect of Al2O3 thickness on the electrochemical properties up to 300 nm was also studied.
Related Papers
- → Electrochemical surface passivation of LiCoO2 particles at ultrahigh voltage and its applications in lithium-based batteries(2018)377 cited
- → Chemical synthesis and steady state characterization of a nanocrystalline lithium cobalt oxide(2020)2 cited
- → SECONDARY BATTERIES – LITHIUM RECHARGEABLE SYSTEMS – LITHIUM-ION | Positive Electrode: Lithium Cobalt Oxide(2009)9 cited
- → Recovery of LiCoO2 from Waste Lithium Ion Batteries by Means of Flotation.(2002)4 cited
- Nano-SiO_2 Doped Lithium Cobalt Oxide Thin Film as A Novel Electrode Material(2009)