CO2 Reduction on Supported Ru/Al2O3 Catalysts: Cluster Size Dependence of Product Selectivity
Citations Over TimeTop 10% of 2013 papers
Abstract
The catalytic performance of a series of Ru/Al2O3 catalysts with Ru content in the 0.1–5% range was examined in the reduction of CO2 with H2. At low Ru loadings (≤0.5%) where the active metal phase is highly dispersed (mostly atomically) on the alumina support, CO is formed with high selectivity. With increasing metal loading, the selectivity toward CH4 formation increases, while that for CO production decreases. In the 0.1% Ru/Al2O3 catalyst, Ru is mostly present in atomic dispersion, as scanning transmission electron microscopy (STEM) images obtained from the fresh sample prior to catalytic testing reveal. STEM images recorded from this same sample, following the temperature programmed reaction test, clearly show the agglomeration of small metal particles (and atoms) into 3D clusters. The clustering of the highly dispersed metal phase is responsible for the observed dramatic selectivity change during elevated temperature tests: dramatic decrease in CO and large increase in CH4 selectivity. Apparent activation energies, estimated from the slopes of Arrhenius plots, of 82 and 62 kJ/mol for CO and CH4 formation were determined, respectively, regardless of Ru loading. These results suggest that the formation of CO and CH4 follow different reaction pathways or proceed on active centers of a different nature. Reactions with CO2/H2 and CO/H2 mixtures (under otherwise identical reaction conditions) reveal that the onset temperature of CO2 reduction is about 150 °C lower than of CO reduction.
Related Papers
- → Modified Arrhenius equation for the frequency dependence of the transition temperatures of polymers(1989)20 cited
- → Analysis of activation energy of grouped parallel reactions(1972)66 cited
- → A view on the break in the Arrhenius plots(1985)9 cited
- → Arrhenius-Type Relationship of Viscosity as a Function of Temperature for Mustard and Cotton Seed Oils(2020)3 cited