Removal of Carbon Dioxide from Flue Gas by Ammonia Carbonation in the Gas Phase
Citations Over Time
Abstract
The increasing anthropogenic CO2 emissions and possible global warming have challenged the United States and other countries to find new and better ways to meet the world's increasing needs for energy while, at the same time, reducing greenhouse gas emissions. This study explores the possibility of using ammonium bicarbonate (NH4HCO3) formation by ammonia carbonation in the gas phase to achieve reduction of CO2 emissions from industrial flue gas. Experimental results obtained in this study demonstrate that removal of flue-gas CO2 can be achieved via formation of solid NH4HCO3 through ammonia carbonation in the gas phase. Removal of CO2 is quantified by monitoring CO2 concentrations at the entrance and exit of the reactor column. The products of ammonia carbonation were identified by solid-state nuclear magnetic resonance analysis. For the experimental conditions employed in this study, current results show up to 50% removal of CO2 from the flue gas. Higher efficiencies are likely achievable by optimizing the operating conditions and geometry of the reactor.
Related Papers
- → Environmental performance of alternatives to treat fly ash from a waste to energy plant(2019)20 cited
- → A novel method to capture and store flue gas carbon dioxide (CO2): Accelerated mineral carbonation(2009)7 cited
- Carbon Dioxide Sequestration by Mineral Carbonation in Simulated Flue Gas Using Wollastonite(2010)
- Analysis on the absorption of CO_2 in flue gas from powerplant with ammonia for CO_2 sequestration(2008)
- → A novel method to capture and store flue gas carbon dioxide (CO2): Accelerated mineral carbonation(2009)