Particulate Emissions of Gas Turbine Engine Combustion of a Fischer−Tropsch Synthetic Fuel

Citations Over TimeTop 10% of 2010 papers

Abstract

We have performed a comprehensive test of the effects of alternative fuels on the trace gas, nonvolatile particulate material (PM), and volatile PM emissions performance of a PW308 aircraft engine. The tests evaluated standard JP-8 jet fuel, a “zero sulfur” and “zero aromatic” synthetic fuel produced from a natural gas feedstock using the Fischer−Tropsch (FT) process, and a 50/50 blend of the FT fuel and JP-8. A Pratt & Whitney PW308 engine was operated under the same thrust and combustion conditions to ensure that the tests captured fuel differences, rather than engine operation differences. Emissions of trace gases, soot particles, and nucleation/growth PM were directly impacted by the sulfur and aromatic content of the fuel. FT fuel combustion greatly reduced SO2 (>90%), gaseous hydrocarbons (40%), and NO (6−11%) content compared to JP-8 combustion. In general, combustion of the JP-8/FT fuel blend resulted in emissions intermediate to the FT and JP-8 values. FT combustion dramatically reduces soot particle number, mass, and size relative to JP-8, but increases effective soot particle density. In all cases, the drag behavior of the soot particles indicates deviations from spherical shape and effective soot particle densities are consistent with the soot particles being aggregates of primary spherules. As expected, FT combustion plumes support negligible formation of nucleation/growth mode particles (the number of nucleation growth mode particles is 500% for sulfur containing JP-8). However, particle nucleation/growth for blended fuel combustion is enhanced relative to JP-8, despite the lower sulfur content of the FT/JP-8 fuel blend. A computational model explains the unexpected particle formation result primarily as the effect of much lower soot emissions present in blended fuel combustion exhaust compared to JP-8. Fuel composition, specifically aromatic and sulfur content, affect all aspects of emissions performance and the effect of simultaneously reducing aromatic and sulfur content can lead to surprising behavior.

Related Papers

• → Combination of LII and extinction measurements for determination of soot volume fraction and estimation of soot maturity in non-premixed laminar flames(2015)47 cited
• → C2H2 and PAH as soot growth reactants in premixed C2H4-air flames(1996)49 cited
• → Study on the Mechanism of Soot Formation and Oxidization in a DI Diesel Engine Using Postinjection(2009)3 cited
• → Investigation on Nano Particulate Aerosol at Idling Conditions of Vehicles(2018)
• Soot Reaction Properties (Ground-Based Study)(2000)