Influence of Combustion Conditions and Coal Properties on Physical Properties of Fly Ash Generated from Pulverized Coal Combustion†
Citations Over TimeTop 14% of 2009 papers
Abstract
To develop combustion technology for upgrading the quality of fly ash, the influences of the coal properties, such as the size of pulverized coal particles and the two-stage combustion ratio during the combustion, on the fly ash properties were investigated using our test furnace. The particle size, density, specific surface area (obtained by the Blaine method), and shape of fly ash particles of seven types of coal were measured. It was confirmed that the size of pulverized coal particles affects the size of the ash particles. Regarding the coal properties, the fuel ratio affected the ash particle size distribution. The density and shape of the ash particles strongly depended on their ash size. Our results indicated that the shape of the ash particles and the concentration of unburned carbon affected the specific surface area. The influence of the two-stage combustion ratio was limited.
Related Papers
- → Coal-particle size effects on NO reduction and burnout characteristics with air-staged combustion in a pulverized coal-fired furnace(2016)84 cited
- → Effect of agglomeration on pulverized-coal combustion(1995)10 cited
- → Particle Size Determination by Impact Measurement in Pneumatically Conveyed Solids(2001)7 cited
- Synthesis of CaF_2 Nanopowders by Direct Precipitation Method(2009)
- TEST AND STUDY ON INFLUENCE OF PULVERIZED COAL PARTICLE SIZE UPON PERFORMANCE OF NO_x EMISSION FOR PULVERIZED COAL COMBUSTION(2004)