Highly Efficient Liquefaction of Woody Biomass in Hot-Compressed Alcohol−Water Co-solvents

Citations Over TimeTop 10% of 2010 papers

Abstract

Alcohol (methanol or ethanol) and water showed synergistic effects on biomass direct liquefaction, and the 50 wt % co-solvent of either methanol−water or ethanol−water was found to be the most effective solvent for the liquefaction of eastern white pine sawdust. The 50 wt % aqueous alcohol at 300 °C for 15 min produced a bio-oil yield at approximately 65 wt % and a biomass conversion of >95%. At a temperature higher than 300 °C, conversion of bio-oil to char was significant by repolymerization. The Fourier transform infrared spectroscopy (FTIR) and gas chromatography−mass spectrometry (GC−MS) analyses of the obtained bio-oils confirmed the presence of primarily phenolic compounds and their derivatives (such as benzenes), followed by aldehyde, long-chain (and cyclic) ketone and alcohol, ester, organic acid, and ether compounds. Gel permeation chromatography (GPC) results suggested that hot-compressed ethanol as the liquefaction solvent favored lignin degradation into monomeric phenols. The X-ray diffraction (XRD) patterns of sawdust before and after the liquefaction displayed that the cellulosic structure of the feedstock was completely converted into amorphous carbon at around 300 °C and into crystalline carbon at about 350 °C.

Related Papers

• → Influence of Sawdust Particle Sizes on the Physico-Mechanical Properties of Unfired Clay Blocks(2021)17 cited
• → Pretreatment of Sawdust for Producing Sawdust Concrete(2013)9 cited
• → Effect of Sawdust and Sawdust Ash on Expansive Soil(2022)1 cited
• → Effect of Various Sawdusts and Logs Media on the Fruiting Body Formation ofPhellinus gilvus(2007)3 cited
• → Effect of Sawdust Age and Nitrogen Application on the Decomposition Rates of Two Types Sawdust Used for Blueberry Production(2004)