Dewetting of Silica Surfaces upon Reactions with Supercritical CO₂ and Brine: Pore-Scale Studies in Micromodels

Citations Over TimeTop 1% of 2012 papers

Abstract

Wettability of reservoir minerals and rocks is a critical factor controlling CO(2) mobility, residual trapping, and safe-storage in geologic carbon sequestration, and currently is the factor imparting the greatest uncertainty in predicting capillary behavior in porous media. Very little information on wettability in supercritical CO(2) (scCO(2))-mineral-brine systems is available. We studied pore-scale wettability and wettability alteration in scCO(2)-silica-brine systems using engineered micromodels (transparent pore networks), at 8.5 MPa and 45 °C, over a wide range of NaCl concentrations up to 5.0 M. Dewetting of silica surfaces upon reactions with scCO(2) was observed through water film thinning, water droplet formation, and contact angle increases within single pores. The brine contact angles increased from initial values near 0° up to 80° with larger increases under higher ionic strength conditions. Given the abundance of silica surfaces in reservoirs and caprocks, these results indicate that CO(2) induced dewetting may have important consequences on CO(2) sequestration including reducing capillary entry pressure, and altering quantities of CO(2) residual trapping, relative permeability, and caprock integrity.

Related Papers

• → Gaining control of pattern formation of dewetting liquid films(2001)259 cited
• → Toward direct pore-scale modeling of three-phase displacements(2017)19 cited
• → Micromodel studies of three‐fluid porous media systems: Pore‐scale processes relating to capillary pressure‐saturation relationships(1993)109 cited
• → Glass bead micromodel study of solute transport(1999)56 cited
• → Impact of Displacement Direction Relative to Heterogeneity on Averaged Capillary Pressure‐Saturation Curves(2022)11 cited