Application of the Perturbed-Chain SAFT Equation of State to Associating Systems

Citations Over TimeTop 10% of 2002 papers

Abstract

The perturbed-chain SAFT (PC−SAFT) equation of state is applied to pure associating components as well as to vapor−liquid and liquid−liquid equilibria of binary mixtures of associating substances. For these substances, the PC−SAFT equation of state requires five pure-component parameters, two of which characterize the association. The pure-component parameters were identified for 18 associating substances by correlating vapor pressure and liquid density data. A comparison to an earlier version of SAFT confirms the good results for pure substances. When only one associating compound is present in a mixture, the PC−SAFT equation of state does not require mixing rules for the association term. Using one binary interaction parameter kij for the dispersion term only, the model was applied to azeotropic and nonazeotropic vapor−liquid equilibria at low and at high pressures, as well as to liquid−liquid equilibria. Simple mixing and combining rules were adopted for mixtures with more than one associating compound, introducing no additional binary interaction parameter. The simultaneous description of liquid−liquid and vapor−liquid equilibrium was also possible with a single kij parameter.

Related Papers

• → Vapor–liquid equilibrium data and critical points for the system H2S+COS. Extension of the PSRK group contribution equation of state(2000)30 cited
• → Modeling liquid–liquid and vapor–liquid equilibria for the hydrocarbon+N-formylmorpholine system using the CPA equation of state(2013)13 cited
• → Isothermal Vapor–Liquid Equilibrium for the Binary System of 2,3,3,3-Tetrafluoropropene and 2-Chloro-1,1,1,2-tetrafluoropropane(2015)9 cited
• → Prediction of phase equilibria for the systems containing ammonia using PRASOG(1998)7 cited
• → Vapor−Liquid Equilibrium of Two Aqueous Systems that Exhibit Liquid−Liquid Phase Separation(1999)14 cited