Economic Analysis of Integrated Continuous and Batch Pharmaceutical Manufacturing: A Case Study

Citations Over TimeTop 1% of 2011 papers

Abstract

The capital, operating, and overall costs of a dedicated continuous manufacturing process to synthesize an active pharmaceutical ingredient (API) and formulate it into tablets are estimated for a production scale of 2000 t of tablets per year, with raw material cost, production yield, and API loading varied over broad ranges. Costs are compared to batch production in a dedicated facility. Synthesis begins with a key organic intermediate three synthetic steps before the final API; results are given for key intermediate (KI) costs of $100 to $3000/kg, with drug loadings in the tablet of 10 and 50 wt %. The novel continuous process described here is being developed by an interdisciplinary team of 20 researchers. Since yields are not yet well-known, and continuous processes typically have better yields than batch ones, the overall yields of the continuous processes with recycling were set equal to that of the batch process. Without recycling, yields are 10% lower, but less equipment is required. The continuous process has not been built at large scale, so Wroth factors and other assumptions were used to estimate costs. Capital expenditures for continuous production were estimated to be 20 to 76% lower, depending on the drug loading, KI cost, and process chosen; operating expenditures were estimated to be between 40% lower and 9% higher. The novel continuous process with recycling coupled to a novel direct tablet formation process yields the best overall cost savings in each drug loading/KI price scenario: estimated savings range from 9 to 40%. Overall cost savings are also given assuming the yield in the continuous case is 10% above and 10% below that of the batch process. Even when yields in the continuous case are lower than in the batch case, savings can still be achieved because the labor, materials handling, CapEx, and other savings compensate.

Related Papers

• → Modernizing Pharmaceutical Manufacturing: from Batch to Continuous Production(2015)838 cited
• → Continuous granulation in the pharmaceutical industry(2005)295 cited
• → Reactor design and selection for effective continuous manufacturing of pharmaceuticals(2021)65 cited
• → Continuous Feeding-Blending in Pharmaceutical Continuous Manufacturing(2020)5 cited
• Development and validation of process analytical methods for a continuous pharmaceutical manufacturing process of tablets based on wet granulation(2014)