Cathode Composites for Li–S Batteries via the Use of Oxygenated Porous Architectures | doi.page

0 citations0 references

Cathode Composites for Li–S Batteries via the Use of Oxygenated Porous Architectures

Journal of the American Chemical Society2011Vol. 133(40), pp. 16154–16160

Citations Over TimeTop 1% of 2011 papers

Rezan Demir‐Cakan, Mathieu Morcrette, Farid Nouar, Carine Davoisne, Thomas Devic, D. Gonbeau, Robert Dominko, Christian Serre, Gérard Férey, Jean‐Marie Tarascon

Abstract

Li-S rechargeable batteries are attractive for electric transportation because of their low cost, environmentally friendliness, and superior energy density. However, the Li-S system has yet to conquer the marketplace, owing to its drawbacks, namely, soluble polysulfide formation. To tackle this issue, we present here a strategy based on the use of a mesoporous chromium trimesate metal-organic framework (MOF) named MIL-100(Cr) as host material for sulfur impregnation. Electrodes containing sulfur impregnated within the pores of the MOF were found to show a marked increase in the capacity retention of Li-S cathodes. Complementary transmission electron microscopy and X-ray photoelectron spectroscopy measurements demonstrated the reversible capture and release of the polysulfides by the pores of MOF during cycling and evidenced a weak binding between the polysulphides and the oxygenated framework. Such an approach was generalized to other mesoporous oxide structures, such as mesoporous silica, for instance SBA-15, having the same positive effect as the MOF on the capacity retention of Li-S cells. Besides pore sizes, the surface activity of the mesoporous additives, as observed for the MOF, appears to also have a pronounced effect on enhancing the cycle performance. Increased knowledge about the interface between polysulfide species and oxide surfaces could lead to novel approaches in the design and fabrication of long cycle life S electrodes.

Citations Over TimeTop 1% of 2011 papers

Abstract

Related Papers