Polymer Light-Emitting Electrochemical Cells: In Situ Formation of a Light-Emitting p−n Junction

Citations Over TimeTop 1% of 1996 papers

Abstract

Solid-state polymer light-emitting electrochemical cells have been fabricated using thin films of blends of poly(1,4-phenylenevinylene) and poly(ethylene oxide) complexed with lithium trifluoromethanesulfonate. The cells contain three layers: the polymer film (as the emissive layer) and indium-tin oxide and aluminum films as the two contact electrodes. When externally biased, the conjugated polymers are p-doped and n-doped on opposite sides of the polymer layer, and a light-emitting p-n junction is formed in between. The admixed polymer electrolyte provides the counterions and the ionic conductivity necessary for doping. The p-n junction is dynamic and reversible, with an internal built-in potential close to the band gap of the redox-active conjugated polymer (2.4 eV for PPV). Green light emitted from the p-n junction was observed with a turn-on voltage of about 2.4 V. The devices reached 8 cd/m(2) at 3 V and 100 cd/m(2) at 4 V, with an external quantum efficiency of 0.3-0.4% photons/electron. The response speed of these cells was around 1 s, depending on the diffusion of ions. Once the light-emitting junction had been formed, the subsequent operation had fast response (microsecond scale or faster) and was no longer diffusion-controlled.

Related Papers

• → Generation of transient cavities in liquids by microsecond pulses of ultrasound(1982)210 cited
• → Preparation and Reaction of Lanthanide(II) Trifluoromethanesulfonates(1994)37 cited
• → Trifluoromethanesulfonates and Trifluoromethanesulfonato‐ O Complexes(1990)42 cited
• → Introduction to Trifluoromethanesulfonates and Trifluoromethanesulfonato‐ O Complexes(1986)27 cited
• [Microsecond delayed Chlorella fluorescence].(1980)