Densities and Volumetric Properties of Ethylene Glycol + Dimethylsulfoxide Mixtures at Temperatures of (278.15 to 323.15) K and Pressures of (0.1 to 100) MPa

Citations Over TimeTop 10% of 2010 papers

Abstract

Densities, ρ, and compressibility coefficients, k = (vo − v)/vo, of ethylene glycol (1) + dimethylsulfoxide (2) mixtures were measured over the whole concentration range at pressures of (0.1 to 100) MPa and temperatures of (278.15 to 323.15) K. Excess molar volumes, isothermal compressibility, and thermal isobaric expansivity coefficients as well as thermal pressure coefficients were calculated. It was revealed that concentration dependences of specific volumes, v, at some state parameters passed a minimum. The shift of minimum position to molar fraction x2 = 0.5 was observed with increasing pressure and decreasing temperature. The negative excess molar volumes, VmE, indicated a compression of EG (1) + DMSO (2) systems when mixing. Composition dependences of isothermal compressibility, κT, and thermal isobaric expansivity coefficients, α, as well as thermal pressure coefficients, β, were near-linear. Both increasing and decreasing of κT and β values were observed with x2 increase depending on temperature and pressure magnitudes within the range of state parameters investigated.

Related Papers

• → A corresponding state equation for the prediction of isobaric heat capacity of liquid HFC and HFO refrigerants(2017)26 cited
• → Thermodynamic properties of (ethan-1,2-diol + water) at the temperature 298.15 K I. Molar volumes, isobaric molar heat capacities, ultrasonic speeds, and isentropic functions(1991)52 cited
• → Excess isobaric heat capacities of some binary mixtures: (a C5-alkanol + n-heptane) at 298.15 K(1986)23 cited
• → Prediction of thermodynamic properties of some hydrofluoroether refrigerants using a new equation of state(2005)22 cited
• → Prediction of the volumetric and thermodynamic properties of some refrigerants using GMA equation of state(2006)20 cited