Enhanced Reducibility of Ce1-xTixO2 Compared to That of CeO2 and Higher Redox Catalytic Activity of Ce1-x-yTixPtyO2-δ Compared to That of Ce1-xPtxO2-δ
Citations Over TimeTop 10% of 2006 papers
Abstract
Nanocrystalline Ce(1)(-)(x)Ti(x)O(2) (0 < or = x < or = 0.4) and Ce(1-)(x)(-)(y)Ti(x)Pt(y)O(2)(-)(delta) (x = 0.15, y = 0.01, 0.02) solid solutions crystallizing in fluorite structure have been prepared by a single step solution combustion method. Temperature programmed reduction and XPS study of Ce(1)(-)(x)Ti(x)O(2) (x = 0.0-04) show complete reduction of Ti(4+) to Ti(3+) and reduction of approximately 20% Ce(4+) to Ce(3+) state compared to 8% Ce(4+) to Ce(3+) in the case of pure CeO(2) below 675 degrees C. The substitution of Ti ions in CeO(2) enhances the reducibility of CeO(2). Ce(0.84)Ti(0.15)Pt(0.01)O(2)(-)(delta) crystallizes in fluorite structure and Pt is ionically substituted with 2+ and 4+ oxidation states. The H/Pt atomic ratio at 30 degrees C over Ce(0.84)Ti(0.15)Pt(0.01)O(2)(-)(delta) is 5 and that over Ce(0.99)Pt(0.01)O(2)(-)(delta) is 4 against just 0.078 for 8 nm Pt metal particles. Carbon monoxide and hydrocarbon oxidation activity are much higher over Ce(1-)(x)(-)(y)Ti(x)Pt(y)O(2) (x = 0.15, y = 0.01, 0.02) compared to Ce(1)(-)(x)Pt(x)O(2) (x = 0.01, 0.02). Synergistic involvement of Pt(2+)/Pt degrees and Ti(4+)/Ti(3+) redox couples in addition to Ce(4+)/Ce(3+) due to the overlap of Pt(5d), Ti(3d), and Ce(4f) bands near E(F) is shown to be responsible for improved redox property and higher catalytic activity.
Related Papers
- Technological Innovations for Separation and Refinement of Fluorite Mineral(2012)
- Mineral Processing Study and Commercial Production on a Fluorite Mine(2014)
- Low Temperature Flotation Experiment Study of a Certain Fine-Grained Refractory Quartz-Type Fluorite Ore(2015)
- Experimental Research on New Reagents and New Technology for a Fluorite Ore in Menyuan Qinghai(2011)
- Features of Separation Process of Refractory Polymetallic Fluorite Ore for Fluorite Recovery(1999)