Dependence of Band Offset and Open-Circuit Voltage on the Interfacial Interaction between TiO2 and Carboxylated Polythiophenes
Citations Over TimeTop 10% of 2006 papers
Abstract
The interface of planar TiO(2)/polymer photovoltaic cells was modified with two carboxylated polythiophenes having different densities of carboxylic acid groups. Both of the interface modifiers increase the photocurrent of the cells but lower the open-circuit voltage. The work function of the TiO(2), measured using a Kelvin probe, increases with increasing density of carboxylic acid groups due to the formation of interfacial dipoles pointing toward the TiO(2) surface. The formation of interfacial dipoles results in a shift in the band offset at the TiO(2)/polymer interface, which explains the decrease in the open-circuit voltage. This work demonstrates that care must be taken when using carboxylic acid side groups to attach polymers to titania surfaces in photovoltaic cells. If the density of attachment groups is just enough to attach the polymer, then the benefits of the interface modifier can be realized without substantially decreasing the open-circuit voltage.
Related Papers
- → Direct comparison of photoemission spectroscopy and in situ Kelvin probe work function measurements on indium tin oxide films(2006)124 cited
- → Local Work Function Measurements on Various Inorganic Materials Using Kelvin Probe Force Spectroscopy(2007)9 cited
- → Kelvin Probe Force Microscopy of Semiconductors(2007)8 cited
- → A Novel Method for True Work Function Determination of Metal Surfaces by Combined Kelvin Probe and Photoelectric Effect Measurements(2000)2 cited
- → Surface investigation by using a Scanning Kelvin Probe(2010)