Characterization and Analysis of Self-Assembly of a Highly Active Colloidal Catalyst for Water Oxidation onto Transparent Conducting Oxide Substrates

Abstract

An IrO2 colloid stabilized by citrate ions was self-assembled on an indium tin oxide (ITO) electrode when it was immersed in the colloid solution at pH 3.5. The IrO2 colloid on the ITO surface was characterized using electrochemical, inductively coupled plasma mass spectroscopic, X-ray diffraction spectroscopic, scanning electron microscopic, and atomic force microscopic techniques. The self-assembly was promoted steeply at pH 3.5 to 4.1, although it hardly occurred at pH 5.3 to 9.7. It is considered to be caused by chemical interaction between carboxylic groups on the citrate stabilizer and hydroxyl groups of the ITO surface. The adsorption isotherm of the IrO2 colloid onto the ITO surface was analyzed by a Langmuir adsorption isotherm to provide the maximum coverage and an adsorption equilibrium constant Γmax = 1.1 × 10-8 mol cm-2 and Kads = 1.8 × 104 M-1 at 25 °C, respectively. The Kads value increased from 6.7 × 103 to 1.8 × 104 M-1 with a temperature increase from 5 to 25 °C. The temperature dependence of Kads gave ΔH° = 36.5 kJ mol-1, ΔG° = −24.4 kJ mol-1, and ΔS° = 204 J mol-1 K-1 at 25 °C. The positive ΔH° and ΔS° values are explained by the rearrangement of solvating water molecules and counter cations surrounding the IrO2 colloid that is involved in its assembly on the ITO surface. In electrocatalytic water oxidation, the maximum turnover frequency of the IrO2 catalyst was 23 600 h-1 under potential static conditions at 1.3 V versus Ag/AgCl.

Characterization and Analysis of Self-Assembly of a Highly Active Colloidal Catalyst for Water Oxidation onto Transparent Conducting Oxide Substrates

Citations Over TimeTop 10% of 2008 papers

Abstract

Related Papers