Bacterial Retention on Superhydrophobic Titanium Surfaces Fabricated by Femtosecond Laser Ablation

Citations Over TimeTop 10% of 2011 papers

Abstract

Two-tier micro- and nanoscale quasi-periodic self-organized structures, mimicking the surface of a lotus Nelumbo nucifera leaf, were fabricated on titanium surfaces using femtosecond laser ablation. The first tier consisted of large grainlike convex features between 10 and 20 μm in size. The second tier existed on the surface of these grains, where 200 nm (or less) wide irregular undulations were present. The introduction of the biomimetic surface patterns significantly transformed the surface wettabilty of the titanium surface. The original surface possessed a water contact angle of θ(W) 73 ± 3°, whereas the laser-treated titanium surface became superhydrophobic, with a water contact angle of θ(W) 166 ± 4°. Investigations of the interaction of S. aureus and P. aeruginosa with these superhydrophobic surfaces at the surface-liquid interface revealed a highly selective retention pattern for two pathogenic bacteria. While S. aureus cells were able to successfully colonize the superhydrophobic titanium surfaces, no P. aeruginosa cells were able to attach to the surface (i.e., any attached bacterial cells were below the estimated lower detection limit).

Related Papers

• → Experimental and theoretical investigation of the ablation mechanisms during femptosecond laser machining(2010)25 cited
• → Analytical solution to predict laser ablation rate in a graphitic target(2009)10 cited
• → Laser-induced surface modifications, structure formation, and ablation of organic polymers(1995)7 cited
• → The explanation of the fiber optic probe method signal by means of the time-resolved photography for laser ablation bubble(2002)
• → Experimental research of two-wavelength laser ablation biological tissue(2009)