Alternate Assembly of Ordered Multilayers of SiO2 and Other Nanoparticles and Polyions
Citations Over TimeTop 1% of 1997 papers
Abstract
Alternate layer-by-layer assembly of colloidal SiO2 particles with polycations has been investigated by quartz crystal microbalance (QCM), scanning electron microscopy (SEM), and atomic force microscopy (AFM). QCM measurement confirmed the high regularity and reproducibility of the assembling process that depends on particle concentration, particle size, and ionic strength. The individual adsorption step was completed within 15 s. The thickness of adsorbed layers increased with increasing SiO2 concentrations at the three particle sizes used (45, 25, and 78 nm in diameter), unlike the case for other polyion assemblies. It also increased with increasing ionic strength of aqueous SiO2 dispersions. According to SEM observation, the assembled film possessed surprisingly flat surfaces at optimized ionic strengths. AFM observation revealed that SiO2 particles were not closely packed. The neutralization ratio of SiO2 and PDDA was estimated by turbidity measurement. Comparison of turbidity and QCM data indicated that the positive charge on PDDA was not completely neutralized by the negative charge on SiO2 particles in the course of alternate adsorption. This is apparently caused by a large difference in rigidity and charge density between SiO2 and PDDA. Since the charge density on PDDA is significantly larger than that on SiO2, all of the former charges cannot form short-distance ion pairs with surface charges of rigid SiO2 particles. The formation of long-distance charge pairs between SiO2 and PDDA, unlike the case for oppositely charged pairs of linear polyions, appears to be the origin of the remarkable dependence of film thickness and surface morphology on ionic strength and particle concentration. The other nanoparticles (CeO2 and TiO2) were similarly assembled with oppositely-charged linear polyions. Further modifications of the film structure were demonstrated by assembly between particles with different sizes and that between SiO2 and enzyme and by taking advantage of premixing components.
Related Papers
- → Effect of dissolved organic matter on the stability of magnetite nanoparticles under different pH and ionic strength conditions(2010)212 cited
- → Aggregation kinetics and surface charge of CuO nanoparticles: the influence of pH, ionic strength and humic acids(2013)129 cited
- → Colloidal stability of bentonite clay considering surface charge properties as a function of pH and ionic strength(2010)111 cited
- → Co-transport of colloidal MgAl-LDH and U(VI) in saturated granite particle column: role of colloid concentration, ionic strength, pH and flow rate(2023)2 cited
- Coupled Effect of Input Concentration and Solution Ionic Strength on Colloid Transport in Saturated Porous Media(2011)