Achieving High-Current Carbon Nanotube Emitters
Citations Over TimeTop 10% of 2005 papers
Abstract
When a carbon nanotube emitter is operated at high currents (typically above 1 microA per emitter), a small voltage drop ( approximately few volts) along its length or at its contact generates a reverse/canceling electric field that causes a saturation-like deviation from the classical Fowler-Nordheim behavior with respect to the applied electric field. We present a correction to the Fowler-Nordheim equation to account for this effect, which is experimentally verified using field emission and contact electrical measurements on individual carbon nanotube emitters. By using rapid thermal annealing to improve both the crystallinity of the carbon nanotubes and their electrical contact to the substrate, it is possible to reduce this voltage drop, allowing very high currents of up to 100 microA to be achieved per emitter with no significant deviation from the classical Fowler-Nordheim behavior.
Related Papers
- → Comparison of Field Emissions from Side Wall and Tip of an Individual Carbon Nanotube(2005)34 cited
- → Modeling of field emission nanotriodes with carbon nanotube emitters(2003)28 cited
- Optimization of screening and emitter density for an array of carbon nanotube field emitters(2013)
- → Effect of some parameters of carbon nanotubes on their field emission(2002)
- → A stable high power carbon nanotube field-emitter device(2003)