Membrane-Free Battery for Harvesting Low-Grade Thermal Energy
Citations Over TimeTop 10% of 2014 papers
Abstract
Efficient and low-cost systems are desired to harvest the tremendous amount of energy stored in low-grade heat sources (<100 °C). An attractive approach is the thermally regenerative electrochemical cycle (TREC), which uses the dependence of electrode potential on temperature to construct a thermodynamic cycle for direct heat-to-electricity conversion. By varying the temperature, an electrochemical cell is charged at a lower voltage than discharged; thus, thermal energy is converted to electricity. Recently, a Prussian blue analog-based system with high efficiency has been demonstrated. However, the use of an ion-selective membrane in this system raises concerns about the overall cost, which is crucial for waste heat harvesting. Here, we report on a new membrane-free battery with a nickel hexacyanoferrate (NiHCF) cathode and a silver/silver chloride anode. The system has a temperature coefficient of -0.74 mV K(-1). When the battery is discharged at 15 °C and recharged at 55 °C, thermal-to-electricity conversion efficiencies of 2.6% and 3.5% are achieved with assumed heat recuperation of 50% and 70%, respctively. This work opens new opportunities for using membrane-free electrochemical systems to harvest waste heat.
Related Papers
- → Solid state generators and energy harvesters for waste heat recovery and thermal energy harvesting(2018)66 cited
- → Collection of low-grade waste heat for enhanced energy harvesting(2016)30 cited
- → Design, Optimization and Control of a Thermal Energy Storage System(1989)5 cited
- → Household application of thermoelectric generator in the field of propagating power from waste heat(2020)1 cited
- System Simulation of Thermal Energy Storage involved Energy Transfer model in Utilizing Waste heat in District Heating system Application(2015)