Sulfide Nanocrystal Inks for Dense Cu(In1−xGax)(S1−ySey)2 Absorber Films and Their Photovoltaic Performance
Citations Over TimeTop 1% of 2009 papers
Abstract
Recent developments in the colloidal synthesis of high quality nanocrystals have opened up new routes for the fabrication of low-cost efficient photovoltaic devices. Previously, we demonstrated the utility of CuInSe(2) nanocrystals in the fabrication of CuInSe(2) thin film solar cells. In those devices, sintering the nanocrystal film yields a relatively dense CuInSe(2) film with some void space inclusions. Here, we present a general approach toward eliminating void space in sintered nanocrystal films by utilizing reactions that yield a controlled volume expansion of the film. This is demonstrated by first synthesizing a nanocrystal ink composed of Cu(In(1-x)Ga(x))S(2) (CIGS). After nanocrystal film formation, the nanocrystals are exposed to selenium vapor during which most of the sulfur is replaced by selenium. Full replacement produces a approximately 14.6% volume expansion and reproducibly leads to good dense device-quality CIGSSe absorber films with reduced inclusion of void space. Solar cells made using the CIGSSe absorber films fabricated by this method showed a power conversion efficiency of 4.76% (5.55% based on the active nonshadowed area) under standard AM1.5 illumination.
Related Papers
- → Comparative Study of the Second Generation a-Si:H, CdTe, and CIGS Thin-Film Solar Cells(2019)48 cited
- → Invited Paper: CIGS-based thin film solar cells and modules: Unique material properties(2012)71 cited
- → Non-vacuum printing process for CIGS solar cells on rigid and flexible substrates(2003)11 cited
- → Improved performance of silicon nanowire/cadmium telluride quantum dots/organic hybrid solar cells(2014)12 cited
- → CIGS and CIS Nanomaterials for Solar Cells(2017)1 cited