Compression Behavior of Single-Layer Graphenes

Citations Over TimeTop 1% of 2010 papers

Abstract

Central to most applications involving monolayer graphenes is its mechanical response under various stress states. To date most of the work reported is of theoretical nature and refers to tension and compression loading of model graphenes. Most of the experimental work is indeed limited to the bending of single flakes in air and the stretching of flakes up to typically approximately 1% using plastic substrates. Recently we have shown that by employing a cantilever beam we can subject single graphenes to various degrees of axial compression. Here we extend this work much further by measuring in detail both stress uptake and compression buckling strain in single flakes of different geometries. In all cases the mechanical response is monitored by simultaneous Raman measurements through the shift of either the G or 2D phonons of graphene. Despite the infinitely small thickness of the monolayers, the results show that graphenes embedded in plastic beams exhibit remarkable compression buckling strains. For large length (l)-to-width (w) ratios (> or =0.2) the buckling strain is of the order of -0.5% to -0.6%. However, for l/w < 0.2 no failure is observed for strains even higher than -1%. Calculations based on classical Euler analysis show that the buckling strain enhancement provided by the polymer lateral support is more than 6 orders of magnitude compared to that of suspended graphene in air.

Related Papers

• → Stabilization of Langmuir monolayer of hydrophobic thiocholesterol molecules(2008)8 cited
• → Experimental study of the effect of hydrodynamic coupling of micro-cantilever array on the dynamic response of micro-cantilever(2010)1 cited
• Cantilever Styles and Scope of Large Cantilever Multilayer and High-rise Structures(2014)
• → Fabrication of micro and nano cantilevers review(2017)