Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer Coating

Citations Over TimeTop 1% of 2011 papers

Abstract

Rechargeable lithium–sulfur (Li–S) batteries hold great potential for next-generation high-performance energy storage systems because of their high theoretical specific energy, low materials cost, and environmental safety. One of the major obstacles for its commercialization is the rapid capacity fading due to polysulfide dissolution and uncontrolled redeposition. Various porous carbon structures have been used to improve the performance of Li–S batteries, as polysulfides could be trapped inside the carbon matrix. However, polysulfides still diffuse out for a prolonged time if there is no effective capping layer surrounding the carbon/sulfur particles. Here we explore the application of conducting polymer to minimize the diffusion of polysulfides out of the mesoporous carbon matrix by coating poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT:PSS) onto mesoporous carbon/sulfur particles. After surface coating, coulomb efficiency of the sulfur electrode was improved from 93% to 97%, and capacity decay was reduced from 40%/100 cycles to 15%/100 cycles. Moreover, the discharge capacity with the polymer coating was ∼10% higher than the bare counterpart, with an initial discharge capacity of 1140 mAh/g and a stable discharge capacity of >600 mAh/g after 150 cycles at C/5 rate. We believe that this conductive polymer coating method represents an exciting direction for enhancing the device performance of Li–S batteries and can be applicable to other electrode materials in lithium ion batteries.

Related Papers

• → A synergistic modification of polypropylene separator toward stable lithium–sulfur battery(2019)66 cited
• → Electropolymerized Multilayer Conducting Polymers with Response to Gaseous Hydrogen Chloride(2005)43 cited
• → Vapor Growth Carbon Fiber Felt as an Efficient Interlayer for Trapping Polysulfide in Lithium-Sulfur Battery(2018)7 cited
• → Composites of Poly (3,4-Ethylenedioxythiophene) with Nanostructures as Electrochemical Sensors for Application in Bioelectroanalysis(2018)3 cited
• → Liquid Metal as a Self-Healing and Polysulfide Trapping Binder for Lithium Sulfur Battery(2021)