High rate and stable cycling of lithium metal anode
Citations Over TimeTop 1% of 2015 papers
Abstract
Lithium metal is an ideal battery anode. However, dendrite growth and limited Coulombic efficiency during cycling have prevented its practical application in rechargeable batteries. Herein, we report that the use of highly concentrated electrolytes composed of ether solvents and the lithium bis(fluorosulfonyl)imide salt enables the high-rate cycling of a lithium metal anode at high Coulombic efficiency (up to 99.1%) without dendrite growth. With 4 M lithium bis(fluorosulfonyl)imide in 1,2-dimethoxyethane as the electrolyte, a lithium|lithium cell can be cycled at 10 mA cm(-2) for more than 6,000 cycles, and a copper|lithium cell can be cycled at 4 mA cm(-2) for more than 1,000 cycles with an average Coulombic efficiency of 98.4%. These excellent performances can be attributed to the increased solvent coordination and increased availability of lithium ion concentration in the electrolyte. Further development of this electrolyte may enable practical applications for lithium metal anode in rechargeable batteries.
Related Papers
- → Li2S-based anode-free full batteries with modified Cu current collector(2020)119 cited
- → Prelithiated Surface Oxide Layer Enabled High-Performance Si Anode for Lithium Storage(2019)102 cited
- → Towards a stable Li–CO2 battery: The effects of CO2 to the Li metal anode(2019)81 cited
- → SiOx/C anodes with high initial coulombic efficiency through the synergy effect of pre-lithiation and fluoroethylene carbonate for lithium-ion batteries(2021)46 cited
- → Effects of the Low Coulombic Efficiency of Zinc Anode on the Cycle Performance of Zn–Ni Battery(2020)21 cited