Inversion channel diamond metal-oxide-semiconductor field-effect transistor with normally off characteristics

Citations Over TimeTop 10% of 2016 papers

Abstract

We fabricated inversion channel diamond metal-oxide-semiconductor field-effect transistors (MOSFETs) with normally off characteristics. At present, Si MOSFETs and insulated gate bipolar transistors (IGBTs) with inversion channels are widely used because of their high controllability of electric power and high tolerance. Although a diamond semiconductor is considered to be a material with a strong potential for application in next-generation power devices, diamond MOSFETs with an inversion channel have not yet been reported. We precisely controlled the MOS interface for diamond by wet annealing and fabricated p-channel and planar-type MOSFETs with phosphorus-doped n-type body on diamond (111) substrate. The gate oxide of Al2O3 was deposited onto the n-type diamond body by atomic layer deposition at 300 °C. The drain current was controlled by the negative gate voltage, indicating that an inversion channel with a p-type character was formed at a high-quality n-type diamond body/Al2O3 interface. The maximum drain current density and the field-effect mobility of a diamond MOSFET with a gate electrode length of 5 μm were 1.6 mA/mm and 8.0 cm(2)/Vs, respectively, at room temperature.

Related Papers

• → Single cell recordings with pairs of complementary transistors(2006)18 cited
• → Membrane-oxide semiconductor field-effect transistor (MOSFET) sensors(1991)9 cited
• → Performance Analysis of Double Gate MOSFET with High-k Dielectric(2023)2 cited
• The Gate-to-drain Overlap Effects on the Hot-carrier Induced Degradation of LDD P-channel MOSFET's(1993)
• → Gate-oxide thickness dependence of hot-carrier-induced degradation in buried p-MOSFETs(2002)2 cited