32 × 32 silicon electro-optic switch with built-in monitors and balanced-status units

Citations Over TimeTop 1% of 2017 papers

Abstract

To construct large-scale silicon electro-optical switches for optical interconnections, we developed a method using a limited number of power monitors inserted at certain positions to detect and determine the optimum operating points of all switch units to eliminate non-uniform effects arising from fabrication errors. We also introduced an optical phase bias to one phase-shifter arm of a Mach-Zehnder interferometer (MZI)-type switch unit to balance the two operation statuses of a silicon electro-optical switch during push-pull operation. With these methods, a 32 × 32 MZI-based silicon electro-optical switch was successfully fabricated with 180-nm complementary metal-oxide-semiconductor (CMOS) process technology, which is the largest scale silicon electro-optical switch to the best of our knowledge. At a wavelength of 1520 nm, the on-chip insertion losses were 12.9 to 16.5 dB, and the crosstalk ranged from -17.9 to -24.8 dB when all units were set to the 'Cross' status. The losses were 14.4 to 18.5 dB, and the crosstalk ranged from -15.1 to -19.0 dB when all units were in the 'Bar' status. The total power consumptions of the 32 × 32 switch were 247.4 and 542.3 mW when all units were set to the 'Cross' and 'Bar' statuses, respectively.

Related Papers

• → Path-independent insertion loss optical space switch(1987)22 cited
• → Electrostatically driven micromechanical 2 × 2 optical switch(1991)17 cited
• → Compact, low insertion loss 16/spl times/16 optical switch-array modules(1997)4 cited
• → Low-insertion-loss compact 3D-MEMS optical matrix switch with is input/output ports(2005)
• Compact,integrated PLZT optical switch array(2015)