Microfluidic routing of aqueous and organic flows at high pressures: fabrication and characterization of integrated polymer microvalve elements
Citations Over TimeTop 13% of 2004 papers
Abstract
This paper presents the first systematic engineering study of the impact of chemical formulation and surface functionalization on the performace of free-standing microfluidic polymer elements used for high-pressure fluid control in glass microsystems. System design, chemical wet-etch processes, and laser-induced polymerization techniques are described, and parametric studies illustrate the effects of polymer formulation, glass surface modification, and geometric constraints on system performance parameters. In particular, this study shows that highly crosslinked and fluorinated polymers can overcome deficiencies in previously-reported microvalve architectures, particularly limited solvent compatibility. Substrate surface modification is shown effective in reducing the friction of the polymer-glass interface and thereby facilitating valve actuation. A microchip one-way valve constructed using this architecture shows a 2 x 10(8) ratio of forward and backward flow rates at 7 MPa. This valve architecture is integrated on chip with minimal dead volumes (70 pl), and should be applicable to systems (including chromatography and chemical synthesis devices) requiring high pressures and solvents of varying polarity.
Related Papers
- → Maskless functionalization of a carbon nanotube dot array biosensor using an ultrafine atmospheric pressure plasma jet(2015)47 cited
- → Surface functionalization of microporous carbon fibers by vapor phase methods for CO2 capture(2023)3 cited
- → Selective external surface functionalization of large-pore silica materials capable of protein loading(2016)24 cited
- → A multi-probe micro-fabrication apparatus based on the friction-induced fabrication method(2013)12 cited
- → Thermal Functionalization of GaN Surfaces with 1-Alkenes(2013)13 cited