Block poly(arylene ether sulfone ketone)s containing densely sulfonated linear hydrophilic segments as proton conductive membranes
Citations Over TimeTop 10% of 2012 papers
Abstract
Synthesis and properties of aromatic block copolymers composed of highly sulfonated phenylene ether sulfone ketone units as hydrophilic blocks and phenylene ether biphenyene sulfone units as hydrophobic blocks are reported. High molecular weight block copolymers 4 (Mw = 275–362 kDa and Mn = 76–144 kDa) with different compositions (number of repeat unit in the hydrophobic blocks (X) = 15, 30, or 60, and that of hydrophilic blocks (Y) = 4, 8, or 12) were synthesized. Transparent and bendable membranes were obtained by casting from the solution of 4. Due to the rigid rod-like structure of the hydrophilic blocks, the nanophase-separated morphology was not as distinct as that of the conventional sulfonated aromatic block copolymer membranes. Highly sulfonated hydrophilic blocks, which contained phenylene rings with sulfonic acid groups and electron-withdrawing sulfone or ketone groups, contributed to the high proton conductivity and improved oxidative stability of 4 membranes. The 4 (X60Y12) membrane with low IEC (1.18 mequiv g−1) showed comparable or higher conductivity than that of Nafion at >80% relative humidity (RH).
Related Papers
- → Branched and Cross‐Linked Proton Conductive Poly(arylene ether sulfone) Ionomers: Synthesis and Properties(2006)38 cited
- → Perfectly alternating poly(arylene ether ketone sulfone)'s(2000)4 cited
- → Synthesis and Performance of Sulfonated Poly (Arylene Ether Sulfone) as Proton Exchange Membrane(2012)1 cited
- 고분자 전해질 연료전지용 Poly(arylene ether sulfone) copolymer의 합성(2010)
- → Synthesis and Properties of Novel Post Cross-Linked Sulfonated Poly (arylene Ether sulfone)s for Proton Exchange Membrane Fuel Cell Applications(2010)