High performance flexible supercapacitors based on secondary doped PEDOT–PSS–graphene nanocomposite films for large area solid state devices

Citations Over TimeTop 10% of 2020 papers

Abstract

In this work, we propose the development of high performance and flexible supercapacitors using reduced graphene oxide (rGO) incorporated poly(3,4 ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT-PSS) nanocomposites by secondary doping. The structural and morphological features of the composite film were analyzed in detail using SEM, AFM, FTIR, XPS and TGA. Secondary doping of ethylene glycol (EG) assisted by rGO incorporation significantly enhances the room temperature conductivity of PEDOT-PSS films from 3 S cm-1 to nearly 1225 S cm-1 for a 10 wt% composite. The secondary doped PEDOT-PSS:EG/rGO composite film demonstrated improved electrochemical performances with specific capacitance of 174 (F g-1) and energy density of 810 (W h kg-1) which is nearly 4 times greater than pristine PEDOT-PSS due to synergetic interactions between rGO and PEDOT-PSS. The prepared composite films show long term stability with capacitance retention of over 90% after 5000 cycles of charging-discharging. The nanocomposite films used in the present investigation demonstrates percolative behavior with a percolation threshold at 10 wt% of rGO in PEDOT-PSS. The assembled supercapacitor device could be bent and rolled-up without a decrease in electrochemical performance indicating the potential to be used in practical applications. To demonstrate the practical applicability, a rolled-up supercapacitor device was constructed that demonstrates operation of a red LED for 40 seconds when fully charged. This study will provide new dimensions towards designing cost effective, flexible and all solid-state supercapacitors with improved electrochemical performance using electrodes based on secondary doped PEDOT-PSS/rGO organic thin films.

Related Papers

• → Research progress on a novel conductive polymer–poly(3,4-ethylenedioxythiophene) (PEDOT)(2009)88 cited
• → Synthesis of Poly(3,4-ethylenedioxythiophene)–Platinum and Poly(3,4-ethylenedioxythiophene)–Poly(styrenesulfonate) Hybrid Fibers by Alternating Current Bipolar Electropolymerization(2018)21 cited
• → Poly(3,4‐ethylenedioxythiophene) (PEDOT)‐Coated MWCNTs Tethered to Conducting Substrates: Facile Electrochemistry and Enhanced Coloring Efficiency(2008)3 cited
• Preparation and Application Progress of 3,4-Ethylenedioxythiophene and Its Polymer(2015)
• → Optical and electrical analysis of poly(3,4-ethylenedioxythiophene): poly(4-styrenesulfonate) PEDOT:PSS films and characterizations of stretching memory loops based on ITO/PEDOT:PSS/Ag memristor devices(2025)